I had a similar issue with a SAS drive In the backplane of a dell server. I thought for sure the drive was failing. Reseated it, cleaned the ports, ran some tests, just kept failing without any obvious signs why it was. Replaced it with a spare and same issue. That seemed very unlikely, so I put the old drive in another slot and its still running just fine going on 2 years without an issue. If you have another toaster give it a try.

The market is rife with cheapo junk tech. Ive seen several crapo off brand drive toasters fail, so thats possible. I don’t know the brand of yours so I can’t speak to them.

It could also just be the power supply for the toaster is crapping out, or doesn’t provide enough amperage. Those power supplies dont always keep providing the same amount of power forever, sometimes it drops over time, and that could be the cause too. Or they could be poorly made, meaning they probably drop in even short time periods.

If you have another power supply with the same voltage and higher amperage, you could try that. You could also try running only one drive in there and see if it keeps failing, if no issues, you could try the other drive and see if that one has issues. If that one doesn’t have issues either it could indicate power issues.

Neither do Samsung, the jellyfin app works great on Samsung after the annoying process of installing it, but can’t put a VPN on it that I’m aware of.

I prefer distros if available, but in some cases the version in the distros can suck. A solid example, and this could 100% be user error, but I used aur to get Picard on my tablet, but there was no app menu bar. Like at all, no window settings in the world made a difference, and the global menu didn’t show anything either. So I couldn’t change settings at all. I removed the aur package and installed the flatpak, everything worked no problem.

Flatpaks are okay, but due to laziness, I’m not proficient with making them interact well with each other.

App images can be great, but also annoying depending on how your system handles them. On a Debian based machine it would “install” the app image as if it were a normal app, and in some cases even check for updates. In garuda I have to manually go to the file and execute it each time. I’m no Linux master, so I could probably do something in garuda to make it work similar to Debian, but I only have one app there that I care about and I’m lazy…

I don’t like snaps, they seem finicky to me.

If the Dev has their own recommended source, package, or whatever I try to stick to that. I.e. if they say their focus is on an app image, but aur has it, and there’s a flatpak, and x y z options, I’ll try the app image, and if that does what I need it to, I stick with it. If they recommend snap I try to find another app or another option to install.

Try USB 2 ports using a USB 2 drive, and try different ports. Ive seen issues where I had a perfectly good drive and it wouldnt boot at all. Using a different port it installed fine. Similar issues using USB 3 drive or ports in machines only a few years old.

Amcrest ptz. The app blows, but it does the job. Bonus ptz if kitty is on the move. Otherwise stationary cameras work too obviously cheaper.

https://amcrest.com/security-cameras-for-home-and-business/ptz-cameras.html

Yup look at me wagglin my finger over here.

If I decide to put up with this type of attitude any further I’ll go get a job in fast food. At least then I’d get paid.

Have fun with your gatekeeping.

Would you say your attitude and responses here drive inclusion or increase motivation to join opensource or improve things voluntarily?

Live usbs are great, but ive 100% had issues after install before on several distros. Arch of course being the worst. Live distros boots, install, boot loop… But that happened on popos too. Ive also seen other more minor issues like Bluetooth stops working after install despite it being a base install. Like literally install, reboot, and Bluetooth no longer works. Given this is on newer hardware, but it can be hella frustrating to go from a live boot that works to a fresh install that doesn’t match the experience.

I don’t think anyone is blaming volunteers. More so stating the obvious. If you’re new to Linux, you cant be expected to know everything about it. You may not know that some hardware may not work well with Linux. You may not know secure boot sux with linux. You may not know arch is not the best intro to Linux but because arch based distros are recommended frequently for gaming you may try it first. Linux can have a steep learning curve, expecting everyone to RTFM and all the forum posts is unreasonable. Sometimes people just need to try and experience pain and frustration.

That’s an insult to things that suck.

Ive had truenas, moved to unraid in the past few months. The one constant has been nextcloud is a pita. Even the legacy manual install blows. I dropped it and have been much happier ever since.

Pretty sure that was home assistant. I had the same issue. Phone would even get piping hot. Killed home assistant, problem solved. I’m connected to VPN to home using openvpn 24/7. Too lazy to switch to wireguard :p

WD reds I believe are smr, wd red pros are cmr, or at least that was a thing for a while that WD did silently.

Pretty sure something like 10 years ago crashplan deleted a bunch of customer data in a deduplication job gone wrong.

This is the correct answer. Dell, and other oems, have stored their windows keys in firmware on motherboards for years now. You could literally install on a fresh drive and it should auto activate. Typically at most you have to go to click activate yourself.

This is all assuming the machine came with a pro license and wasn’t upgraded of course. It should have a sticker on it.

Also thank you for pointing this out. Not sure how I missed this. I already looked in the passwd file to make sure it was an actual user account, they’re right next to exciter and had the same uid. You saved me a boat load of time trying to figure that one out. Thanks for sharing your wisdom.

This was the issue. I did an update recently of truenas and apparently the polkitd user took over the uid for my plex account. Unfortunately it looks like this also caused some level of corruption since even changing the uid and gid haven’t fixed the issue and plex is borked.

Luckily I have backups, so not all is lost, and even if it was, I could probably just regenerate that data.