If dns resolved then it’s not blocked. You need to look at your network.

Bypass dns connect to the ip and port. What happens?

This won’t work, your wan ip isn’t dynamic, it’s on the ISP NAT network and your resulting ip to public services is shared across many customers. CG-NAT.

I don’t know where you work but don’t access your tailnet from a work device and ideally not their network.

Speaking to roku, you could buy a cheap raspberri pi and usb network port. One port to the network the other to roku. The pi can have a tailscale advertised network to the roku, and the roku probably needs nothing since everything is upstream including private tailscale 100.x.y.z networks which will be captured by your device in the middle raspberri pi.

I guess that’d cost like 40 ish dollars one time.

I’m far from an expert sorry, but my experience is so far so good (literally wizard configured in proxmox set and forget) even during a single disk lost. Performance for vm disks was great.

I can’t see why regular file would be any different.

I have 3 disks, one on each host, with ceph handling 2 copies (tolerant to 1 disk loss) distributed across them. That’s practically what I think you’re after.

I’m not sure about seeing the file system while all the hosts are all offline, but if you’ve got any one system with a valid copy online you should be able to see. I do. But my emphasis is generally get the host back online.

I’m not 100% sure what you’re trying to do but a mix of ceph as storage remote plus something like syncthing on a endpoint to send stuff to it might work? Syncthing might just work without ceph.

I also run zfs on an 8 disk nas that’s my primary storage with shares for my docker to send stuff, and media server to get it off. That’s just truenas scale. That way it handles data similarly. Zfs is also very good, but until scale came out, it wasn’t really possible to have the “add a compute node to expand your storage pool” which is how I want my vm hosts. Zfs scale looks way harder than ceph.

Not sure if any of that is helpful for your case but I recommend trying something if you’ve got spare hardware, and see how it goes on dummy data, then blow it away try something else. See how it acts when you take a machine offline. When you know what you want, do a final blow away and implement it with the way you learned to do it best.

3x Intel NUC 6th gen i5 (2 cores) 32gb RAM. Proxmox cluster with ceph.

I just ignored the limitation and tried with a single sodim of 32gb once (out of a laptop) and it worked fine, but just backed to 2x16gb dimms since the limit was still 2core of CPU. Lol.

Running that cluster 7 or so years now since I bought them new.

I suggest only running off shit tier since three nodes gives redundancy and enough performance. I’ve run entire proof of concepts for clients off them. Dual domain controllers and FC Rd gateway broker session hosts fxlogic etc. Back when Ms only just bought that tech. Meanwhile my home “ARR” just plugs on in docker containers. Even my opnsense router is virtual running on them. Just get a proper managed switch and take in the internet onto a vlan into the guest vm on a separate virtual NIC.

Point is, it’s still capable today.

I thought this was an onion article.

It’s solving a real problem in a niche case. Someone called it gimmicky, but it’s actually just a good tool currently produced by an unknown quantity. Hopefully it’ll be sorted or someone else takes up the reigns and creates an alternative that works perfectly for all my different isos.

For the average home punter maybe even up to home lab enthusiast, probably not saving much time. For me it’s on my keyring and I use it to reload proxmox hosts, Nutanix hosts, individual Ubuntu vms running ROS Noetic and not to mention reimaging for test devices. Probably a thrice weekly thing.

So yeah, cumulatively it’s saving me a lot of time and just in trivialising a process.

If this was a spanner I’d just go Sidchrome or kingchrome instead of my Stanley. But it’s a bit niche so I don’t know what else allows for such simple multi iso boot. Always open to options.

Probably because it uses nothing online, including the voice to text. It’s only local device. A rare claim for those kinds of features.

Pop! Os

Imo.

https://johnmjennings.com/an-important-lesson-from-bullet-holes-in-planes/

The responses needs to be contain representation at least equally to non Firefox people who no longer care to answer a poll about a product that they don’t use. Why? Only current users are going to answer the poll, not the people with the cuts and pain that forced them back to Chrome or safari. Asking survivors how to reinforce survival actually doesn’t solve for why do many people off board Firefox.

Frankly you should ask people like my 60-70yo parents why chrome not Firefox. You’ll learn more from that than the corrected responses of people who loudly have preferences but at the end of the day would stay either way. My parents tried Firefox, but then left it. Although they only tried from insistence from their son.

PS: I agree with the poll. I don’t want a chat bot either. If I did, I’d install a plugin that integrates once of my own choosing. Given the availability, privacy, and ease of lmstudio I’d rather leave it in its own place outside the browser and network. I don’t know how those like my parents feel about a bot that can probably answer their questions. I also doubt they care. Maybe it would help them ask questions they’re too embarrassed to ask friends and family for. Usually how to questions they’ve asked dozens of times. But that’s super dangerous.

I spent like 20 minutes self hosting and running over tailscale so traffic is always private… Never had an issue. I’ve got over 20 devices accessible on it.

Easy to remote register over ssh just by sending the installer plus running with server name plus key, then setting a static password.

I still think gaming wide moonlight is great though. You won’t really regret that.

The hand-etched apology will not appear on the company’s actual devices come global launch

Luckily the article addresses this.

Other then legacy and uefi does it have a CSM compatibility support mode? An option to enable usb initialisation before bios? Eg wait for usb initialisation?

Some “boot faster” options kind of reorder boot initialisation to a point where it’s not holding the system back.

Though I’m really running out of suggestions… I can imagine you’re pretty frustrated. I know my Dell laptop was a pain to get the right settings to get usb to boot and the stupid 100db beep to silent on boot interruption.

And you probably confirmed that live boot worked too I assume.

In the actual bios, can you see a boot order and see uefi for Windows/whatever is on your internal disk? But not any other entries?

I suggest a few more things:

Try a different brand usb. Different motherboards sometimes don’t support some usb brands. In fact, a Lenovo server I rebuilt refused to boot off certain usbs.

Some motherboards don’t initialise boot off some usb ports. Sometimes the additional ports are on another controller and initialise too slow.

Just try a straight working Ubuntu live boot usb to remove any ventoy from equation. Ubuntu has real signed uefi (and no shim) granted by Microsoft. I think that’s how it works, uefi is a mess.

Try to start isolating all the different factors, and there could be more. It doesn’t necessarily mean anything definitive if it works on another machine.

For me I want to know how much frame latency there is since I’m suspicious and I want to try things to see the effect and I just don’t know how to get that information in an OSD like I can with msi afterburner.

If someone knows what can do this in Linux, please reply!

Instead I just stopped all competitive and cooperative gaming. Which is a bit of a shame. Sometimes I’ll load up windows to join friends but usually by the time I’ve updated whatever game I’ve gotten over it.

Don’t get me wrong, hiccups aside I’m very happy which is why I’m in Linux most of the time. But it’s not always a wonderful world.

Giving you an up vote instead of myself leaving a snarky comment.

You know it’s stuff like this that forces me to rewrite dns on the firewall, but that’s probably not even possible if they use DNS over TLS.

Hate to break it to you, but most IT Managers don’t care about crowdstrike: they’re forced to choose some kind of EDR to complete audits. But yes things like crowdstrike, huntress, sentinelone, even Microsoft Defender all run on Linux too.

Well, what I really wonder is if because the kernel can include it, if this will make an install more agnostic. Like literally pull my disk out of a gaming nvidia machine, and plug it into my AMD machine with full working graphics. If so this is good for me since I use a usb-c nvme ssd for my os to boot from on my work and home machines and laptops for when I’m not worrying. All three currently have nvidia cards and this works ok. I have some games to chill and take a break. My works core OS for work MDM etc unmodified. I like it that way.

I realise this is not a terribly useful case, but I could see it for graphically optimised VM migrations too not that I have many. Less work in transitioning gives greater flexibility.