Library Socialist

  • 0 Posts
  • 18 Comments
Joined 1 month ago
cake
Cake day: October 14th, 2026

help-circle



  • Your app will need to be able to use Reticulum. There’s a browser already designed for it, called NomadNet, which gives stripped down versiions of things.

    For the forward - yeah, basically people can setup mailboxes that will hold messages till the receiver is online. I’ve got one running on my home system, very easy.

    For hardware - depends what you’re looking for. If it’s just for your phone/laptop, there’s some packaged stuff (you’ll still need to flash though).

    If you want your router to work with LoRA, I used this without issue - it can come with a case. Heltec Wifi LoRa32 V3 433MHZ 863MHZ ESP32 S3 SX1262 OLED Display LoRa Kit for Arduino Meshtastic IoT LoRaWAN Development Board You’ll just need to be familiar with a command line to flash - AI can be a big helper here. Basically flash it, put Reticulum on your router, connect the LoRA board via USB and write the interface on the router (via ssh), and you’re up! You can make it public and see it on https://rmap.world/.

    Got mine on AliExpress, no issues. Also in Europe. One thing that does matter for location is frequency - for Europe it’s the 868 MHz.


  • So basically, the internet runs on TCP/IP, which is provided by an ISP.

    Reticulum is a new protocal in the same spot - it puts packets out.

    However, while your TCP/IP address is usually tied to your location, and unencrypted, Reticulum is tied only to a cryptographic address. Which means that it can go anywhere, via any path - and is encrypted while it does so. Only you can unpack the packet and see what’s in it, so your ISP can’t spy on you, and it’s hard to block access.

    And this also means it’s easier to work on different physical media - so Reticulum can work over LoRA (low wattage) radios, that are similar to walkie talkies in power and don’t require a license. If you’ve got these running, there’s no way an ISP or phone company can stop people from talking to each other.



  • It does both - that’s one of the key advantages it has over things like Meshtastic. It can run over LoRA, over TCP, and other forms, including l2P as well. The big reason to add it to your router, actually, is so it can help with traffic over TCP. If you really want to help, you can add a LoRA antenna via USB to your router, and now you can do LoRA <–> TCP.

    It’s also encrypted by default at the packet level, unlike most of the solutions you’ve described.